 |
This a no big deal repair, its just messy oily and a pain in the neck from laying on the ground. Drop the pan, you will need to cut and splice wiring in the pan on the valve body. re rout the wires and length them the same way as stock (important). Make sure that the o rings and all the plastic pieces come out of the bores. To get replacment parts, GM can provide. In my area Larry's transmision supply will sell to anyone and is a magor supplier to rebuilders. Much much cheaper. And as above if there is a problem with these it should show as a code in the computer |
email BUBBA THE BUS TECH
reply to message
search forums