ATTENTION: All Postings that advertise items for sale will be deleted from the Discussion Forum. You may post sale items for free in the Classifieds section. Sign up now.
Hi, i have a Norcold LRIM the no co faullt keeps coming up, we have reset it as advised by the owners manual, i have looked at the dianostic panel and it justcomes up with ac to high, we have just exported the rv over to the uk, also could it be that the fans are not working please help
The "no co" code is no cooling of the cooling unit. The reset procedure is not an easy one and must be done from the back side of the refer. You have too ground pin 15 to ground. You will have to remove the control board cover and some wiring to access the board. There is also 2 type of boards so the reset steps are very different between the two. Are you sure that you have to correct reset. I was not aware of it ever printed the the owners manual. In oreder to use the coach over in the uk you will have to get a power drop for your shore cord. U.S. power is on 60 hertz at 120 volts a/c. uk I thought was at 50 herts and a bit higher on the volts. If you have U.S items in you coach you might not want to plug in your coach over there.
Hi, i have been sent the corrct procedure by email from Norcold and the engineer has done this but it still keeps coming up NO CO after about 15 minutes of resetting it.
Also we have got a proper step down box to plug the rv up to electrics so it should be ok. Have you any other ideas what it could be.
email Denis
reply to message
post new message
search forums